3-32
Se
c
tion 3
SE
T
U
P
ZS-L
User’s Manual
Section 3
Setting the Display Method
Setting the Display Method
Set what you want to display on the Sensor Controller during measurement in the RUN
mode.
To set the display method, switch to the RUN mode and display the top menu.
Setting the Digital Displays
Set what is displayed on the digital displays in the RUN mode.
■
Number of digits pasts the decimal point
Set the number of display digits in the main display and sub-display.
When five or less digits are set, the digits are disabled from the rightmost digit first.
RUN Mode-MENU key-[DIGITAL]-[DOT]
■
Setting the ECO display
Set the brightness of the main display and sub-displays.
RUN Mode-MENU key-[DIGITAL]-[ECO]
Setting
Description
5th, 4th, 3rd, 2nd, 1st, 0
Sets the number of display digits past the decimal point.
(default value: “3rd” when the ZS-LD50/80/200 is connected, and “4th”
when the ZS-LD20T/40T is connected)
Setting
Description
NORMAL
Sets the displays to normal brightness. (default value)
ECO
Suppresses the brightness by reducing current consumption to darken the displays.
OFF
Turns digital displays OFF.
Содержание ZS-L -
