6-11
ZS-L
User’s Manual
S
e
ct
ion 6
AP
PE
NDIX
Section 6
APPENDIX
F.S.: Full scale of measurement
(*1)
Defined as 1/e
2
(13.5 %) of the center optical intensity in the measurement center distance (effective value).
The beam diameter is sometimes influenced by the ambient conditions of the workpiece such as leaked light
from the main beam.
(*2)
This is the error on the measured value with respect to an ideal straight line. The standard workpiece is
white aluminum ceramics. (In the regular reflection mode on ZS-LD50, the standard workpiece is
glass.)Linearity may change according to the workpiece.
(*3)
This is the “Peak-to-peak” displacement conversion value of the displacement output in the measuring
center distance when the number of samples to average is set to 128, and the measuring mode is set to
the high-resolution mode. The standard workpiece is white aluminum ceramics. (In the regular reflection
mode on ZS-LD50, the standard workpiece is glass.)
(*4)
This is the value obtained in the measuring center distance when the sensor and workpiece are fixed by
an aluminum jig (typical example).
(*5)
This value is obtained when the measuring mode is set to the high speed mode.
(*6)
Europe : Class2 of EN60825-1(IEC60825-1)
Item
ZS-LD50
ZS-LD50S
ZS-LD80
Optical system
Diffuse
reflection
Regular
reflection
Diffuse
reflection
Regular
reflection
Diffuse
reflection
Regular
reflection
Measuring center dis-
tance
50 mm
47 mm
50 mm
47 mm
80 mm
78 mm
Measuring range
±5 mm
±4 mm
±5 mm
±4 mm
±15 mm
±14 mm
Light source
Visible semiconductor laser (wavelength 650 nm, 1 mW max., Class 2 (*6))
Beam diameter
(*1)
60 x 900
µ
m
50
µ
m
60 x 900
µ
m
Linearity
(*2)
±0.1%F.S.
Resolution
(*3)
0.8
µ
m
2
µ
m
Temperature character-
istic
(*4)
0.02%F.S./°C
0.01%F.S./°C
Sampling cycle
(*5)
110
µ
s
LED
indica-
tor
NEAR indica-
tor
Lit near measuring center distance, and nearer than measuring center distance inside
the measuring range
Flashes when the measurement target is outside of the measuring range or when the
received light amount is insufficient
FAR indicator
Lit near measuring center distance, and further than measuring center distance inside
the measuring range
Flashes when the measurement target is outside of the measuring range or when the
received light amount is insufficient
Operating ambient illu-
mination
Illumination on received light surface 3000lx or less (incandescent light)
Ambient temperature
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Degree of protection
Cable length 0.5 m: IP66, cable length 2 m: IP67
Vibration resistance
(destructive)
10 to 150 Hz (0.7 mm double amplitude) 80 min each in X, Y an Z directions
Materials
Case: aluminum die-cast, front cover: glass
Cable length
0.5 m, 2 m
Weight
Approx. 350 g
Содержание ZS-L -
