Omron V530-R160E, Руководство пользователя

Страница: 264 / 294

262
Tr
oubles
hoot
ing
SE
CTION
9
V530-R160
Operation Manual
SECTION 9
Troubleshooting
Errors During Menu Operation
Parallel I/O
Serial interface
Symptoms Causes and remedies
The reading data is not displayed on
the monitor.
• The V530-R160 is not in MON or RUN mode.
p.87
Symptoms Causes and remedies
Trigger signals (input signals) are not
received. • The cables are not correctly wired.
• The signal line is disconnected.
• The V530-R160 is not in
MON or RUN mode.
p.56
p.176
−
Signals cannot be output to the host. • The trigger signal has not been input.
• The signal line is disconnected.
• The cables are not correctly wired.
• The V530-R160 is not in
RUN mode.
p.87
p.176
p.56
−
Symptoms Causes and remedies
No communications are possible. • The cables are not correctly wired.
• The communications specifications of the V530-
R160 do not match those of the host device.
• The communications mode was not selected under
SYS / Communication / RS-232C / 422 .
Select either Normal or Host link for Mode under
RS-232C / 422 depending on the purpose.
• The V530-R160 is not in MON or RUN mode.
p.60
p.206
p.236
−
The Unit operates well initially, but
after a while there is no response from
the V530-R160. • The reception buffer on the external device (e.g.
computer) is full.
Check that settings allow the data to be properly
received.
−