Omron V530-R160E, Руководство пользователя

Страница: 235 / 294

233
V530-R160
Operation Manual
SE
C
T
IO
N
8
Se
rial
Int
e
rf
ac
e (Hos
t Link)
SECTION 8
Communication with the Host
Flow Charts
 When the Serial Interface is used for both Input and Output
Commands for the V530-R160 are written to the Read Area in the programmable controller. The
V530-R160 automatically reads these commands and executes them.
Reading results are written to the programmable controller.
Checks Read Area
for a command.
The rest of the operation is
not performed if the command
format is incorrect.
Programmable Controller
Unit number: 00 (Fixed)
F160
Controller
Returns a command.
Clears the contents of the
Read Area to zero.
Issues a 0 clear command.
Returns write completed
response.
Command requires
output of reading data?
Writes data to Write Area.
While the command is being executed, the BUSY
signal of the parallel I/O interface is ON.
No
Yes
Executes a command.
[Read Area]
[Write Area]
A timeout error occurs if there is no response within 5 seconds and it is assumed that the line is bro-
ken or the programmable controller is not working correctly. An error message is displayed on the
screen and the ERR signal of the parallel I/O interface is turned ON.
If there is a problem using this serial interface specification, communicate using the no-proto-
col format.