manualshive.com logo in svg

Omron V530-R160E, Руководство пользователя, Страница: 184 / 294

Поделиться
Скачать
Omron V530-R160E Скачать руководство пользователя страница 184

182

SECTION 

7

Selec

ting t
he Cond

itions f

or Image Storage (Im

age Storing)

V530-R160

Operation Manual

SECTION 7
System Settings

Selecting the Conditions for Image Storage (Image
Storing)

A function for saving read images regardless of the selected scene is provided. You can determine the
cause of a reading error from the saved image, then adjust the reading conditions and check the result
by reading the same image again. Images can be automatically backed up in a Memory Card.
The read data currently displayed on the monitor can also be captured and saved in the Memory Card.

The asterisk (*) indicates the default setting.

1.

Go into 

SYS

 (system) mode and select 

Image storing

.

Refer to page 180.

The screen for setting the method of image storage
will be displayed.

2.

Make the settings for each item.

3.

Select 

End

.

Menu item

Details

Storing condition

Select whether or not images read by the controller are saved.
(OFF, Only NG*, All) 

 Refer to page 183.

Store to MemCard

Select whether or not images specified by the Storage condi-
tion are automatically backed up in the Memory Card. (OFF*, 
ON)  

Refer to page 184.

Number of Images

Set the maximum volume of image data that can be backed up 
in the Memory Card.  When this figure is exceeded, the stor-
age count is cleared and the existing images are overwritten.  
(Range: 100* to 1000)

Capture display

Select whether or not the currently displayed content of the 
monitor screen is to be captured.
(OFF*, ON) 

Refer to page 185.

Содержание V530-R160E







































































































































































































































































































Отзывы:

Нет отзывов