Omron V530-R160E, Руководство пользователя

Страница: 13 / 294

11
V530-R160
Operation Manual
IN
TR
OD
UC
TION
SECTION
1
SECTION
2
SECTIO
N
3
SE
CTION
4
SECTI
O
N
5
SECTION
6
SECTION
7
SECTIO
N
8
SECTION
9
SE
C
T
IO
N
10
INTRODUCTION
 Touching Signal Lines
To prevent damage from static electricity, use a wrist strap or another device for preventing elec-
trostatic discharges when touching terminals or signal lines in connectors.
 Removing the Memory Card
Before removing a Memory Card, stop the power supply to the Card or turn OFF the V530-R160.
The Memory Card or the V530-R160 itself may be damaged if a Memory Card is removed while
power is being supplied.
(Stop the power supply to the Memory Card from the menu.
Refer to page 172.)
 Turning OFF the Power
Do not turn OFF the power while a message is being displayed indicating that processing is
being performed. Data in memory will be destroyed, and the V530-R160 may not operate cor-
rectly the next time it is started.
 Using the RESET Signal
Do not use the RESET input immediately after power is turned ON. When using RESET input to
synchronize execution timing, wait at least 1 second after turning ON the V530-R160 power sup-
ply before turning ON the RESET signal.