![background image](http://html.mh-extra.com/html/omron/sysmac-cvm1-pro01-v1/sysmac-cvm1-pro01-v1_operation-manual_742440041.webp)
3-4
Section
Changing the Display Language (English/Japanese)
29
7. Press either “1” or “2.”
Note Once the connections have been completed, setting of the connected device
can be performed using the following operations when changing the display lan-
guage between English and Japanese:
•
Turning ON the power supply for the PC while pressing the CLR Key.
•
Connecting the Teaching Box while pressing the CLR Key.
The setting of pin 2 will be checked and become valid only when the power to the
PC is turned ON.
To display messages in Japanese on the Teaching Box, set pin 2 of the DIP
switch on the MC Unit’s rear panel to OFF.
The default setting is ON (English.)
DIP switch
ON
12
3
4
The remaining procedure is the same as that for the CV500-MC221/421.
Note Once the connections have been completed, setting of the connected device
can be performed using the following operations when changing the display lan-
guage between English and Japanese:
•
Turning ON the power supply for the PC while pressing the CLR Key.
•
Connecting the Teaching Box while pressing the CLR Key.
The setting of pin 2 will be checked and become valid only when the power to the
PC is turned ON.
C200H-MC221