1-1
Section
Features and Applications
2
1-1
Features and Applications
Features
The CVM1-PRO01-V1 Teaching Box has the following features.
Compatibility
The Teaching Box can be used with MC Units, Position Control Units, and Posi-
tion Drivers. Either an MC Unit or a Position Control Unit can be connected, de-
pending on the type of Position Control Unit that is selected. In this section, op-
erations are explained in the context of connection to a Position Control Unit.
Detailed Displays
The status of all axes (four axes when the CV500-MC421/221 or CS1W-
MC421/221 is connected and two axes when the C200H-MC221 is connected)
can be seen at a glance from the message displays (16 characters x 4 lines).
Interactive Operation
Interactive operation allows even those who use the Teaching Box for the first
time to use it with ease through key inputs from menus.
Error Messages
Error messages are displayed when errors occur in the Position Control Unit or
in the servodriver. These error messages help minimize the scale of problems
caused by the error.
Applications
The Teaching Box is mainly used for the following purposes.
•
Wiring check
•
Monitoring operation via program execution
•
Checking movement during feeding operations
•
Creating position data through feeding operations and teaching
When feeding operations are performed using a manual pulse generator or jog-
ging operations from the PC, the Teaching Box is mainly used for monitoring the
current position.
