8-1
Section
Changing the Override Value
74
8-1
Changing the Override Value
This operation can be used to change the override value for each axis.
The current override value is displayed for each axis in real time.
Procedure
Use the following procedure to change the override value.
1, 2, 3...
1. Press the OVERRIDE Key.
[OV]X 100.0
Y* 50.0
Z 100.0
U 50.0
An asterisk (
*
) indicates that the origin has not been defined.
[OV]X 100.0
Y* 50.0
CS1W-MC221/421, CV500-MC221/421
C200H-MC221
Pressing the CLR Key from this initial display will return it to the previous
mode.
2. Press the CHG Key.
[OV]X 100.0
Y* 50.0
Z 100.0
U 50.0
The cursor appears.
Y* 50.0
[OV]X 100.0
CS1W-MC221/421, CV500-MC221/421
C200H-MC221
3. Using the Up and Down Keys, move the cursor to the value to be changed. In
this example, the cursor is moved to the Y axis value.
[OV]X 100.0
Y* 50.0
Z 100.0
U 50.0
[OV]X 100.0
Y* 50.0
CS1W-MC221/421, CV500-MC221/421
C200H-MC221
4. Using the numeric Keys, input a new override value between 0.1 and 199.9.
In this example, 111.5 is input.
[OV]X 100.0
Y* 111.5
Z 100.0
U 50.0
[OV]X 100.0
Y* 111.5
CS1W-MC221/421, CV500-MC221/421
C200H-MC221
If a wrong value is input, press the CLR Key. The previous override value will
return.
5. Press the WRITE Key to set the newly input data.
OVER
RIDE
CHG
1
1
1
.
5
