![background image](http://html.mh-extra.com/html/omron/sysmac-cvm1-pro01-v1/sysmac-cvm1-pro01-v1_operation-manual_742440026.webp)
1-6
Section
Operating Procedure
13
1-6
Operating Procedure
Follow the procedure outlined below to operate axes using the Teaching Box.
Set to the MC Unit operating mode
Set the Teaching Box mode
(select functions)
ORIGIN SEARCH mode
OPERATION mode
JOG/MANUAL mode
(see note 3)
Refer to Section 3-1
Refer to Section 3-3
Refer to Section 3-4
and 7-7 (see note 2)
Refer to Section 4-1
Refer to Section 4-2
Refer to Section 4-3
MONITOR mode
Direct command
functions
EXTENSION mode
Other functions
Refer to Section 5
Refer to Section 6
Refer to Section 7
Refer to Section 8
Refer to Section 9
Connect MC Unit
(When using for the first time after purchase, or
when changing connected models.)
Set connected models.
Set the display for English or
Japanese. (includes the internal
DIP switch settings)
Set up online connection with
MC Unit
(When MC Unit has already
been selected.)
(see note 1)
Note
1. By turning ON power to the PC while the CLR Key is pressed, the connected
models selection screen can be displayed.
2. With the CS1W-MC421/221, messages can be switched between English
and Japanese in EXTENSION mode.
3. “Online connection” refers to the state in which data can pass back and forth
between the MC Unit and the Teaching Box.