Omron GRT1-ECT SmartSlice, Руководство по эксплуатации, Страница: 86 / 142

7 GRT1-ECT Installation
7 - 10 GX-series EtherCAT Slave Unit User’s Manual
 Connecting the End Unit
A GRT1-END End Unit must be connected at the end of the SmartSlice I/O System.
 Installing the End Plates
Always secure the SmartSlice I/O System on the DIN Rail by installing End Plates on both sides of
the System. First hook the bottom of the End Plate on the bottom edge of the DIN Rail (1), attach the
top of the End Plate, and pull the End Plate down onto the top edge of the DIN Rail (2). Tighten the
End Plate’s securing screw.
Precautions for Correct Use
Always secure the SmartSlice I/O System by attaching End Plates on both ends.
 Installation of SmartSlice I/O Units
Refer to W455 GRT1-Series SmartSlice I/O Units Operation Manual.
GRT1-END End Unit
1
2
End Unit
End Plate
End Plate
0 0
2
3
4
5
6
7
8
9
1
0
2
3
4
5
6
7
8
9
1
ON ON
+V +V
- V
+V +V
-V -V
UNIT UNIT
I/O
DC24V DC24V
INPUT
INPUT
REGS REGS
NC
NC
ADR
ADR
BACK
BACK
1
2
3
4
RUN RUN
ERR ERR
BF BF
TS TS
UNIT PWR UNIT PWR
I/O PWR I/O PWR
OMRON GRT1-ECT
x10 x10
x1 x1