Omron GRT1-ECT SmartSlice, Руководство по эксплуатации

Страница: 63 / 142

5 - 11
5 GRT1-ECT Procedures
GRT1-series EtherCAT Communication Unit - Operation Manual
5-4
Mainte
nanc
e
5
5-
4-1 Cleaning
5-4 Maintenance
This section describes the routine cleaning and inspection recommended as regular maintenance.
Clean the EtherCAT Communication Unit regularly as described below in order to keep it in an optimum
operating condition.
• Regularly wipe the Unit with a dry, soft cloth.
• If a spot cannot be removed with a dry cloth, dampen the cloth with a neutral cleaner, wring out the
cloth and wipe the Unit.
Precautions for Correct Use
• Never use volatile solvents such as paint thinner, benzine or chemical wipes. These
substances could damage the surface of the Unit.
Be sure to inspect the system periodically to keep it in optimum operating condition. In general, inspect
the system once or twice a year, but more frequently if the system is used in high temperature or high
humidity environments or dirty/dusty conditions.

Inspection Equipment
Prepare the following equipment before inspecting the system.

Required Equipment
Philips type screwdriver, multimeter, alcohol, and a clean cloth.

Optional Test Equipment
Depending on system conditions, a synchroscope, oscilloscope, thermometer or hygrometer (to
measure humidity) might be needed.

Inspection Procedure
Check the items in the following table and correct any that are below standard.
5-4-1 Cleaning
5-4-2 Inspection
Item Standard Equipment
Environmental
conditions Ambient temperature 0° C to 55° C Thermometer
Ambient humidity 10% to 90% Hygrometer
Dust/dirt accumulation None ---
Installation Are the units installed securely? No looseness ---
Are the communication connec-
tors fully inserted? No looseness ---
Are the external wiring screws
tight? No looseness ---
Are the connecting cables
undamaged? No damage ---