Omron E3X-CIF11, Руководство по эксплуатации

Страница: 99 / 138

88
CompoWay/F Message Communications Section 4-5
Write Basic Settings The data contents are shown in the following table.
Write Timer Setting Writes the timer setting for the OFF-delay, ON-delay, or one-shot timer as a 4-
digit hexadecimal value. The setting range is “0000” to “00C8” (0 to 200 ms),
but the possible settings are restricted as follows:
An error will occur if a write operation is executed using a setting interval that
does not meet the restrictions.
Write Hysteresis Width Writes the hysteresis width as a 4-digit hexadecimal value.
Bit Contents
00 Display Contents:
0: Digital incident level
1: Digital percentage
2: Analog incident level
01
02 Display Orientation:
0: Standard
1: Reversed
03 Hold Setting:
0: OFF
2: Peak
3: Bottom
04
05 Flashing Setting:
0: OFF
1: ON
06 Sensing Setting:
0: Standard
2: Long-distance
3: High-speed
07
08 Timer Mode:
1: OFF-delay
2: ON-delay
3: One-shot
09
10 Number of Display Digits:
0: 4 digits
1: 3 digits
2: 2 digits
3: 1 digit
4: 0 digits
11
12
13 Always 0.
14 Teaching during RUN
0: OFF
1: ON
15 Eco Mode
0: OFF
1: ON
Timer setting Setting interval
0 to 20 ms 1-ms increments
20 to 200 ms 5-ms increments