Omron E3X-CIF11, Руководство по эксплуатации

Страница: 94 / 138

83
CompoWay/F Message Communications Section 4-5
Read Basic Settings Reads the basic settings as shown in the following table.
Read Timer Setting Reads the timer setting of the OFF-delay, ON-delay, or one-shot timer as a 4-
digit hexadecimal value. The value is set in ms.
Read Hysteresis Width Reads the hysteresis width as a 3-digit hexadecimal value. Bits 14 and 15 are
used to display the sensing setting
Bit Contents
00 Display Contents:
0: Digital incident level
1: Digital percentage
2: Analog incident level
01
02 Display Orientation:
0: Standard
1: Reversed
03 Hold Setting:
0: OFF
2: Peak
3: Bottom
04
05 Flashing Setting:
0: OFF
1: ON
06 Sensing Setting:
0: Standard
2: Long-distance
3: High-speed
07
08 Timer Mode:
1: OFF-delay
2: ON-delay
3: One-shot
09
10 Number of Display Digits:
0: 4 digits
1: 3 digits
2: 2 digits
3: 1 digit
4: 0 digits
11
12
13 Always 0.
14 Teaching during RUN
0: OFF
1: ON
15 Eco Mode
0: OFF
1: ON
Bit Contents
00 to 11 Hysteresis Width
12 Always 0.
13 Always 0.
14 Sensing Setting:
0: Standard
2: Long-distance
3: High-speed
15