Omron E3X-CIF11, Руководство по эксплуатации

Страница: 101 / 138

90
CompoWay/F Message Communications Section 4-5
Write Special Flags Writes the following settings for the Sensor of the specified unit number. This
command is possible with E3X-DA6TW and E3X-DA8TW Sensors only. An
error will occur if this command is written for any other Sensor.
Response Codes
Normal Completion
Error Completion
Bit Contents
00 Always 0.
01 Always 0.
02 Always 0.
03 Always 0.
04 Operating Mode Flag (one-word):
0: Dark-ON
1: Light-ON
05 Operating Mode Flag (two-word):
0: Dark-ON
1: Light-ON
06 Area Setting Flag:
0: AREA OFF
1: AREA ON
07 Always 0.
08 Always 0.
09 Always 0.
10 Always 0.
11 Always 0.
12 Always 0.
13 Always 0.
14 Always 0.
15 Always 0.
Response code Name Description
“0000” Normal completion No error has occurred.
Response
code
Error name Cause
“1001” Command too
long The command is too long.
“1002” Command too
short The command is too short.
“1003” Number of ele-
ments/data mis-
match The number of data does not match the number
of elements.
“1100” Parameter error The write data setting is out of range.
• Threshold setting out of range.
• Basic settings are out of range.
• Timer setting is not within limits.
• Hysteresis width is out of range.
• Custom Flags are out of range.
• Special Flags are out of range.
• Number of Sensors connected is more than 16.
• Response delay time is set to more than
100 ms.