Omron E3X-CIF11, Руководство по эксплуатации

Страница: 41 / 138

30
Explicit Message Communications Section 2-6
The unit number specified by the instance ID must be set between 0001 Hex
and 0010 Hex.
Note 1. The E39-TM1 Terminal Block Unit has no parameters that can be read, so
an error will occur if the unit number of a Terminal Block Unit is specified.
2. An error will occur if the (Batch) Read ON/OFF Incident Light Levels com-
mand is executed when the unit number of a Unit other than an E3X-DA6-
P is specified.
3. An error will occur if the Read Special Flags command is executed when
the unit number of a Unit other than an E3X-DA6TW or E3X-DA8TW is
specified.
The following tables and explanations provide the data format for each item.
Read ON Incident Light
Level
(See note 2.) Specifies the unit number as
the instance ID and reads
the incident light levels when
Sensor is ON. 009C Unit
number 04
Read OFF Incident
Light Level
(See note 2.) Specifies unit number as the
instance ID and reads the
incident light level when
Sensor is OFF. 009C Unit
number 05
Batch Read ON Inci-
dent Light Levels
(See note 2.) Reads the ON incident light
levels of connected Sen-
sors in a batch. 009C 0000 68
Batch Read OFF Inci-
dent Light Levels
(See note 2.) Reads the OFF incident light
levels of connected Sen-
sors in a batch. 009C 0000 69
Read Threshold Setting Specifies the unit number as
the instance ID and reads
the threshold value.
009C Unit
number 11
Batch Read Threshold
Settings Reads the threshold values
of the connected Sensors in
a batch. 009C 0000 75
Read Basic Settings Specifies the unit number as
the instance ID and reads
basic settings. 009C Unit
number 12
Read Timer Setting Specifies the unit number as
the instance ID and reads
the timer. 009C Unit
number 13
Read Hysteresis Width Specifies the unit number as
the instance ID and reads
the hysteresis width. 009C Unit
number 16
Read Custom Flags Specifies the unit number as
the instance ID and reads
the Custom Flags. 009C Unit
number 17
Read Special Flags
(See note 3.) Specifies the unit number as
the instance ID and reads
the Special Flags. 009C Unit
number 1C
Read Number of Sen-
sors Reads the number of Sen-
sors connected. 009C 0000 30
Read Number of Inci-
dent Light Level Monitor
Units Reads the number of Units
monitoring incident light lev-
els. 009D 0000 31
Explicit message Function Command
Class
ID
Instance
ID
Attribute
ID