Omron CJ1W-PNT21, Инструкции по эксплуатации

Страница: 91 / 202

3 Configuration Software
3-20
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
The PROFINET Identification item is used to detect and setup the names of the PROFINET IO Devices
on the network. The PROFINET Identification item has only one sub-item:
• Network Scan
The sub-item is described in the section below.
In the Network Scan sub-item the following settings and operations must be done prior to starting PRO-
FINET IO Communication.
1
Acquire an overview of all IO Devices connected to the network.
2
Make the IO Devices or IO Controller indicators flash to be able to identify the Unit.
3
Set the Device Name for each of the IO Devices and IO Controllers connected to the network.
It is required for the PC to have an Ethernet connection to the Network to perform these operations.
The Network Scan screen is shown below.
 Search Devices Button
To populate the Network Scan View follow the next sequence:
1
Press the Search Devices button to scan the network and get an overview of all the PROFINET
devices connected to the Ethernet network.
2
Locate the IO Devices at their physical location by making the IO Controllers and IO Devices
flash their indicators.
3
Give each IO Device its PROFINET IO Device name.
The Controls have the following function:
3-3-2 PROFINET Identification
Network Scan