Omron CJ1W-PNT21, Инструкции по эксплуатации

Страница: 53 / 202

1 Features and System Configuration
1-14
CJ-series PROFINET IO Controller Unit Operation Manual for NJ-series CPU Unit (W511)
The basic operating procedures for the PROFINET IO Controller Unit are described here.
Use Sysmac Studio to create and set programs.
For details on operations of Sysmac Studio, refer to Sysmac Studio NJ-One Version 1.0 Operation
Manual (Cat. No. W504).
1-4-2 PROFINET IO Controller Unit Startup Procedure
• Create and register global variables and each POU. Register
variables including variables for accessing the Slave area and for
message communications data.
• Create algorithms of each POU and register local variables of
each POU.
• Register the Unit to the Unit Configuration by using the Unit Editor.
• Allocate device variables for CJ-series Unit to I/O port.
Allocate on the I/O Map View window.
You can use one of the following three methods to allocate.
1. Select and allocate existing variables.
2. Input a new variable name.
3. Automatically create with "Device variable creation".
• Create the Unit settings by using the Special Unit Setup.
(When the program is transferred, items set here will be reflected
in the device variable for CJ-series Unit (for initial setting).)
• Set the unit number switches on the front panel of
the PROFINET I/O Controller Unit.
• Reflect the settings for the switches on the front panel of
the PROFINET IO Controller Unit, in the Unit.
• Transfer programs, Unit Configuration and
Setup and variable information
• Configure the PROFINET IO Controller Unit
Create POU and global
variables
Create Unit Configuration
Create Initialization Data of the Unit
Set the Unit number
Mount and wire
to the Rack
Turn ON the power supply
to the Controller
Transfer the programs
Set up a network configuration
Main Operation
Prog
ram tr
ansf
er and oper
ation
Prog
rams and softw
are settings
Hardw
are setting and Rac
k assemb
ly