![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334038.webp)
1-2 Specifications
1-2-1 CX-Integrator
Specifications
1-10
Item
Specification
Series
Device type
CPU Unit model
CS1H CS1H-CPU67/66/65/64/63(-V1)
CS1G/CJ1G
CS1G-CPU45/44/43/42(-V1)
Note: CompoWay/F cannot be
used with a built-in serial
port on the CPU Unit.
CS1G-H CS1G-CPU45H/44H/43H/42H
CS1H-H CS1H-CPU67H/66H/65H/64H/63H
Note: A CPU Unit with unit version
3.0 or later must be used
when using CompoWay/F
with a built-in serial port on
the CPU Unit
CS1D-H CS1D-CPU67H/65H
Note: When using a pre-Ver. 1.1 CS1D-H
CPU Unit, use it as if it were a
CS1H-H CPU Unit.
CS Series
CS1D-S CS1D-CPU67S/65S/44S/42S
Note: CompoWay/F cannot be
used with a built-in serial
port on the CPU Unit.
CJ2H CJ2H-CPU6
@
(-EIP)
CS1G/CJ1G
CJ1G-CPU45/44
CJ1M CJ1M-CPU23/22/21/13/12/11
CJ1G-H CJ1G-
CPU45H/44H/43H/42H
CJ1H-CPU67H/66H/65H
CJ Series
CJ1H-H
CJ1H-CPU67H-R/66H-R/65H-R/64H-R
Note: A CPU Unit with unit version
3.0 or later must be used
when using CompoWay/F
with a built-in serial port on
the CPU Unit
CP1H-XA CP1H-XA
@@@@
-
@
CP1H-X CP1H-X
@@@@
-
@
CP1H-Y CP1H-Y
@@@@
-
@
CP1L-M CP1L-M
@@@@
-
@
CP-Series
CP1L-L CP1L-L
@@@@
-
@
Note: CompoWay/F can be used
with a CP1W-CIF01/11
Option Board.
G5D (Used for the NSJ5-TQ0
@
-G5D,
NSJ5-SQ0
@
-G5D, NSJ8-TV0
@
-G5D,
NSJ10-TV0
@
-G5D, and
NSJ12-TS0
@
-G5D.)
NSJ Series NSJ
M3D (Used for NSJ5-TQ0
@
-M3D,
NSJ5-SQ0
@
-M3D, and NSJ8-TV0
@
-M3D.)
Note: CompoWay/F can be used
on serial port C (RS-232C
port) on the Controller
Section of the NSJ
Controller.
PLCs that are
accessible as target
PLCs
Note: The target PLC is
the PLC actually
being accessed,
e.g., to
upload/download
the PLC’s
network
configurations.
Note: The CS/CJ-series PLC must have a lot number of 030201 or later (manufactured 1 February
2003 or later) to start the CX-Designer and transfer screen data to an NS-series PT from the
CX-Designer through the PLC. The following PLCs can be used:
CS1G-H, CS1H-H, CS1D-S, CJ1M, or CJ1H-H. (The CS1D-H cannot be used.)
Windows
•
Network Configuration Window: Connected component configuration for each type of communications.
•
System Overview: Interconnections between networks
The following communications are possible for a directly connected target PLC.
Supported
communications
Supported network
communications
•
Ethernet (Access is possible only to CS/CJ-series PLCs, NS-series PTs,
and computers with FinsGateway on the Ethernet network. For
CVM1/CV-series PLCs, only display functions are supported.)
Note: With a CJ2H-CPU6
@
-EIP CPU Unit, connecting to an Ethernet
network is not possible from the built-in EtherNet/IP port or an
EtherNet/IP Unit port if the network connection is set for
EtherNet/IP. Always set Ethernet or Ethernet (FINS/TCP) to connect
to an Ethernet network.
•
Controller Link (Access is possible only to CS/CJ/CP-series PLCs,
NS-series PTs, and computers with FinsGateway on the Controller Link
network.) For C200H-series PLCs and CVM1/CV-series PLCs, only
display functions are supported.)
Note: When the Controller Link Network Diagnosis application is being
used, it is possible to monitor and troubleshoot PLC models in the
Controller Link network other than CS/CJ-series PLCs.
•
SYSMAC LINK (Monitoring is possible only to CS/CJ-series PLCs,
NS-series PTs, and computers with FinsGateway on the SYSMAC LINK
network.)
•
DeviceNet (CS/CJ-series DeviceNet Units, C200H DeviceNet Master
Units, or CVM1/CV-series DeviceNet Master Units)
Note: A C200H-DRM21-V1 or CVM1-DRM21-V1 DeviceNet Master Unit
can be used through a CS/CJ-series DeviceNet Unit.
•
CompoNet (CS/CJ-series CompoNet Master Units)
•
The EtherNet/IP network cannot be used.
Содержание CJ Series
