![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334319.webp)
6-15 Using General-purpose Tools to Set Devices
6-15-1 Setting Device Parameters with Class Instances
6-70
4. Designate the service.
There are two ways to designate the service code, using the generic service code
defined by DeviceNet or designating it directly. To use the generic service code
defined by DeviceNet, check the
Generic
option, then 4. Select the desired service
from the drop-down list. To designate the service code directly, check the
Custom
option, then input the service code in a HEX format string.
Designating the Generic Service Code
Defined by DeviceNet
Designating the Service Code Directly
5. Designate the class and instance parameters for reading and writing data.
6. Input the data corresponding to the designated service.
7. After all of the items have been input, click the
Send
Button. The device response
will be displayed in the
Result
area.
8. Click the
Close
Button to quit device parameter setting. This completes the device
parameter setting.
1. Parameter Reading Example
1) Check
the
Generic
option in
Service
, then select
Get Attribute Single
from the
drop-down list.
2) Designate the class and instance of the parameter to be read.
3) Input
Data Area
for the
Attribute
of the parameter to be read.
4) Click
the
Send
Button. The value that was read will be displayed in the
Result
area.
2. Parameter Setting Example
1) Check
the
Generic
option in
Service
, then select
Set Attribute Single
from the
drop-down list.
2) Designate the class and instance of the parameter to be set.
3) Input
Data Area
for the
Attribute
of the parameter to be set.
4) Input the attribute followed by the value to be set for the parameter in the Data
area.
5) Click
the
Send
Button.
Содержание CJ Series
