![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334232.webp)
4-4
Automatically Set Data Links
4-4-1
Procedure Through Data Link Startup
4-43
4-4
Automatically Set Data Links
This section explains how to make the settings for automatically set data links.
Make the settings in the Automatic Datalink (Controller Link) or Automatic Datalink
(SYSMAC LINK) Dialog Box.
First make the settings for data link operation at PLC startup, and for the automatic
data link setup parameters, and then transfer the data to the startup node.
When using automatically set data links, there is no need to create data link tables with
the Data Link Editor.
Note: With CX-Programmer Ver.6.0 or higher, data links can also be set by setting parameters
for automatically set data links in the Special I/O Unit settings in the I/O Table Window.
4-4-1
Procedure Through Data Link Startup
Start the data links.
Datalink Component Window:
1)
Online - Status
2) Select the
Run
option in the
Operation
field, and then click the
Set
button.
Turn ON the power to the PLC.
Connect online to the startup PLC as the target PLC.
Select
Network - Work Online
(or
Auto Online
) from the menu bar.
Start the Data Link Component.
While online, right-click the Controller Link Unit or SYSMAC LINK Unit in the Online Connection
Information Window and select
Start DataLink
from the menu bar (or while offline, select
Tools -
Start DataLink
).
Set the automatic data link setup parameters.
1) Select
Online - Automatic Datalink Setup
from the DataLink Component Window.
2) Select the Controller Link Unit or SYSMAC LINK Unit mounted to the PLC.
3) Select
Automatic
in the
Generation Type
Field in the Automatic Datalink Dialog Box,
and make the settings for the automatically set data link areas (start words, sizes, and
nodes participating in data links for Area 1 and Area 2).
4) To have the data links started when
the PLC is started, set
Start
for the
status at startup.
Transfer the automatic data link setup parameters to the startup node. (Click the
Write
Button.)
Содержание CJ Series
