![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334306.webp)
6-13 Uploading and Verifying Device Parameters
6-13-2 Uploading Device Parameters
6-57
1. Select the device or devices in the Network Configuration Window. (More than one
device can be selected by holding down the Ctrl Key while clicking the devices.)
2. Select
Component - Parameter - Upload
.
The following confirmation dialog box will be displayed.
3. Click the
Yes
Button.
The progress window will be displayed and the parameters will be uploaded.
Using Parameter Edit Window
Component - Parameter - Edit - Upload Button
To upload the parameters through the Edit Device Parameters Window, use the
following procedure.
1. Select the device from the Network Configuration Window.
2. Select
Component - Parameter - Edit
.
3. Click the
Upload
Button.
The following confirmation dialog box will be displayed.
4. Click the
Yes
Button.
The progress dialog box will be displayed and the parameters will be uploaded.
Note
•
The uploaded parameters will be discarded if the
No
Button is clicked to quit the Edit
Device Parameters Dialog Box after the parameters have been uploaded.
•
When parameters are uploaded from the Network Configuration Window, an asterisk
may be display to the lower left of some devices. This indicates that the I/O size of the
device is not consistent with the I/O size in the scan list in the Master Unit. Either
select
View - Property
, click the
I/O Information
Tab, click the
Edit
Button, and
correct the I/O size, or click the
Get from Scan List
Button and correct the I/O size. If
the I/O size registered in the scan list is incorrect, correct the I/O size for the device in
the Edit Device Parameter Dialog Box.
Содержание CJ Series
