![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334194.webp)
4-2
User Interface Overview
4-2-2 Datalink
Component
4-5
Menu Sub-menus
/Commands
Function
Prints data link information.
Print Preview
Previews the data to be printed.
File
Exit
Exits the Datalink Component Window.
Move Right
Moves the cursor to the right in the Data Link Configuration
Window.
Move Left
Moves the cursor to the left in the Data Link Configuration
Window.
Move Up
Moves the cursor up in the Data Link Configuration Window.
Move Down
Moves the cursor down in the Data Link Configuration Window.
Change Window
Changes the active window.
Zoom Out
Zooms out from within the Data Link Configuration Window.
Zoom In
Zooms in within the Data Link Configuration Window.
Zoom Original
Returns the Data Link Configuration Window to its initial scale.
Show in List
Shows the Data Link Area settings in list format.
Show in Table
Shows the Data Link Area settings in table format.
Show Func Bar
Shows function key guides at the bottom of the Datalink Component
Window. (Enabled for table format only.)
View
Show Offset
Shows the specified offset value on the Node Editing Window.
Wizard
Executes the Datalink Wizard.
Add Source Link
Adds a node to the data links.
Add Destination
Adds the receive area of a participating node to the data links.
Delete Deletes
nodes.
Validate Table
Checks data link tables.
Table Information
Edits data link table information.
Show Node List
Displays a list of nodes.
Table
Redraw
Resets colored displays.
Transfer from PLC
Uploads online data link tables to the computer.
Transfer to PLC
Downloads online data link tables from the computer to a PLC.
Verify Node
Compares data link tables generated by CX-Integrator with data link
tables stored in the PLC. If they do not match, an error dialog box is
displayed.
Data Link
Operation/Status
Displays the operation and data link status of manually set data links.
Automatic Data
Link Setup
Sets parameters for automatically set data links, and transfers them
to the startup node.
Set All Nodes for
Network Operation
Executes transfer, verify, and delete operations for all nodes.
Show All Network
Nodes
Reads data link tables from all nodes.
Online
Delete
Deletes data link tables.
Options
Cycle Time
Sets the communications cycle time (for SYSMAC LINK data link
tables only).
Help Displays
help.
Содержание CJ Series
