Omron CJ Series, Руководство по эксплуатации

Страница: 328 / 415

7-4 Component Monitor
7-4-1 Starting Monitoring
7-7
7-4 Component Monitor
The Component Monitor function monitors the CompoNet Network components and
communications status. If an error occurs, it quickly identifies the cause and provides
the network status.
7-4-1 Starting Monitoring
Use the following procedure to monitor components (Master Unit and Slave Units).
CX-Integrator
Word Slaves
CompoNet Network
Bit Slaves
CompoNet Master Unit
CS/CJ-series PLC
Monitoring Slave participation status and error history
Monitoring Slave Units
Monitoring Master Unit
Note: The information that can be monitored depends on
the component.
1. With the CX-Integrator online, transfer the network configuration to the
computer. Alternatively, the network configuration can be read from a
CX-Integrator project file before going online.
2. Right-click the component to monitor in the Network Configuration Window and
select Monitor .
Alternatively, select the component to monitor and select Monitor from the
Component Menu.
The Component Monitor Window will be displayed.
Information about the Network Status, Slave Status, Unit Status, Error History,
and Error Counter will be displayed in the Monitor Window on the Master Unit.
3. To quit the monitor function, click the Close Button.
Note The contents of the Monitor Window depends on the component. For information on the
contents that can be monitored, refer to the Unit manual.