![background image](http://html1.mh-extra.com/html/omron/cj-series/cj-series_operation-manual_742334146.webp)
2-9 File
Operations
2-9-1 Overview
2-55
2-9 File
Operations
2-9-1 Overview
The following files can be saved and read by the CX-Integrator.
File name
File name
extension
Contents
Storage location
when downloaded
Project files
.cin
Connection information to the Relay
PLC
Overall network configuration of the
target PLC including parameters
(See note.)
---
Network structure
files
.npf
DeviceNet configuration of the
target PLC including parameters
Note: Each file contains only one
network.
All DeviceNet
slaves on the
network
Network
configuration
files
Controller Link
node files
.csv
Network configuration for Controller
Link networks connected directly to
the target PLC
---
DeviceNet device
parameter files
.dvf
Parameters for individual DeviceNet
devices (master or slave)
All DeviceNet
slaves
Component
parameter
files
Component
parameter files
.xml
Parameters for all components
except for DeviceNet devices
Note: These files do not include
Temperature Controller
information.
All components
Controller Link
data link table files
(.cl2)
.cl2
Controller Link user-set data link
tables
CPU Bus Unit
setup area in the
parameter area of
the CPU Unit
Data link
files
SYSMAC LINK
data link table files
.sl3
SYSMAC LINK user-set data link
tables
CPU Bus Unit
setup area in the
parameter area of
the CPU Unit
FINS local routing table files
.rtg
.rxg
Routing tables of the target PLC
Note: The rtg files are compatible
with the earlier file format, and
up to 20 relay routing tables
can be registered.
Parameter area in
the CPU Unit
FINS network routing table files
.rt3
.rx3
Routing tables for all PLCs on the
networks to which the target PLC
belongs
Note: The rt3 files are compatible
with the earlier file format, and
up to 20 relay routing tables
can be registered.
Parameter area in
the CPU Unit
Note:
A project file that contains a CompoNet Network cannot be used with CX-Integrator
version 2.1 or lower. Upgrade to CX-Integrator version 2.2 or higher.
Содержание CJ Series
