![background image](http://html1.mh-extra.com/html/omron/c200hw-srm21-v1-cs1w-srm21/c200hw-srm21-v1-cs1w-srm21_operation-manual_742333254.webp)
233
Connector Terminals
Section 5-2
Compatible External Input
Devices and Cables
Connector Terminals with 32 inputs connect to external devices over one of
the following method.
1,2,3...
1.
Using an XG4A-4030-T MIL Connector (sold separately) to Assemble Your
Own Cable
For details, refer to
MIL Connector Wiring and Assembly
2.
Connecting with OMRON Products Using MIL-compatible Cables Manu-
factured by OMRON
Select the MIL-compatible Cable from the following table according to the
Connector Terminal and I/O Block to be connected.
Note
MIL-compatible cables are not provided as standard and must be ordered
separately.
The following cables are available, each of which is provided with a single MIL
connector for the Connector Terminal end.
Slave model
MIL-compatible Cable
Connecting I/O block
SRT2-ID32ML
G79-I50-25-D1 (50 cm)
G79-I75-50-D1 (75 cm)
G7TC-ID16
G7TC-IA16
SRT2-ID32ML-1
G79-I50-25-D2 (50 cm)
G79-I75-50-D2 (75 cm)
G70A-ZIM16-5
Insert with protrusion
facing right.
MIL-compatible cable
Remarks
G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m)
Wire dia.: AWG28 (other end)
All wires are precut.
G79-Y100C-D1 (1 m)
G79-Y200-D1 (2 m)
G79-Y500C-D1 (5 m)
Fork terminals provided to other end.
Fork terminal: Nippon Tanshi’s 161071-
M2