Omron C200H-CP114, Руководство по эксплуатации, Страница: 63 / 75

49
Appendix A
Specifications
General Specifications
Conforms to the C200H PC specifications.
Performance Specifications
Item Specifications
Cam output points Total: 48 points
Internal/external outputs: 16 points (cam outputs 1 to 16)
Internal outputs: 32 points (cam outputs 17 to 48)
External output NPN transistor, open collector (with photocoupler insulation)
Switching capacity:
100 mA at 24 VDC
Simultaneous ON points: 8 points max.
External output terminal 24-pin connector (Fujitsu’s FCN-360-series connector)
Resolver 3F88L-RS17
3F88L-RS17T
3F88L-RS15
3F88L-RS15W
Note: The 3F88L-RS15 and 3F88L-RS15W each require a resolver cable.
Resolver input terminal 8-pin round connector
(The 20-cm-long 3F88L-CROR2A Auxiliary Connection Cable is provided with the
Cam Positioner Unit.)
Resolver response r/min 800 r/min max.
Angle detection cycle 200
µ
s (at a sampling frequency of 5 kHz)
Cam output response time 450
µ
s (800 r/min)
Control unit (resolver resolution) 1
°
Origin adjustment 1
°
to 359
°
Number of ON/OFF control opera-
tions Maximum of 7 per cam output
Number of cam output data banks 8 banks
A single bank contains 48 points of cam output data.
Cam data is stored in EEPROM.
The bank No. to be used is specified via the C200H using the user’s program or
Programming Console.
Data input present value display Set by the Data Setting Console or via the C200H using the Programming Console
or appropriate device, or the user’s program.
Selectors Front panel: Origin adjustment setting, operation mode selection
Rear panel: CW or CCW selection, cam data protect permitted/not permitted, adjust-
ment operation permitted/not permitted
Internal current consumption 5 VDC 0.3 A max.
External power supply 24 VDC
+10%
/
–15%
2 A min.
Dimensions (mm) 34.5 x 130 x 101 (W x H x D)
Weight Approx. 350 g