Omron C200H-CP114, Руководство по эксплуатации, Страница: 48 / 75

34
Peripheral Device Operations and Data Setting Section 4-2
4. Turn the Memory Download Flag (bit 05 of word n) from OFF to ON.
This operation will begin the transfer to the Cam Positioner Unit of the data
from DM x onward.
Data will be transferred one DM word at a time.
Verify the end of the transfer with the Memory Load Completed Flag (bit 04
of word n + 8).
After bit 04 of word n + 8 has been turned ON, it will automatically turn OFF
when bit 05 of word n turns OFF.
Note Memory downloading can only be executed when the memory load enabled
flag (bit 06 of word n + 8) is ON. (When this bit is ON, the Data Setting Con-
sole display will be lit.) This is independent of the operation mode selector set-
ting and the operating/stopped setting.
Example of Setting Cam ON/OFF Data
Set the following cam ON/OFF data so that the bank number = 1 and the cam
number = 1.
Assume that the Unit number is 0 and that the general DM words to be used
begin at DM 0100.
1,2,3... 1. Set the data shown above.
2. Turn the Special I/O Restart Flag (AR 0100) from OFF to ON. (Or else turn
the C200H
power supply from ON to OFF and then back ON.)
OFF
ON
OFF
ON
Memory download
(bit 05 of word n)
Memory load completed
(bit 04 of word n + 8)
OFF
ON
Cam data
0
°
30
°
50
°
80
°
115
°
150
°
200
°
260
°
320
°
0
°
DM1000
DM1001
0100
0001
DM0100
DM0101
0101
0030
DM0102 0050
DM0103 0080
DM0104 0115
DM0105 0150
DM0106 0200
DM0107 0260
DM0108 0320
DM0109 0000
...
DM0114 0000
01 01
Dedicated DM
Leading DM number for cam data storage
General DM
Step 1
Step 2
Step 3
Step 4
Number of cam data storage combinations
Cam no.
Bank no.
For each step, set the ON data
first and then the OFF data.
If the steps are not to be used,
set either "0000" or "0FFF."
...