Omron C200H-CP114, Руководство по эксплуатации, Страница: 55 / 75

41
Program Examples Section 4-3
Cam Data The cam ON/OFF data is set in blocks of 8 words starting at DM 3000 as
shown below.
The following table shows example data for one block, i.e., cam ON/OFF data
for 15 words.
Note Set 0000 or 0FFF for steps that are not being used.
Program Execution
Procedure The program functions as follow to transfer the data:
1,2,3... 1. Block 1 of data starting at DM 5000 is transferred to the normal DM Area
words starting at DM 0000.
2. The Memory Download Bit (bit 05 of word n) is turned ON to download the
data from the normal DM Area words to the Cam Positioner Unit.
3. When the transfer has been completed, block 2 of data is transferred to the
normal DM Area words and the process is repeated.
4. The same processing is performed for blocks 3 to 6.
Address Block Cam output
numbers
DM 3000 to DM 3119 1 1 to 8
DM 3200 to DM 3319 2 9 to 16
DM 3400 to DM 3519 3 17 to 24
DM 3500 to DM 3719 4 25 to 32
DM 3600 to DM 3919 5 33 to 40
DM 4000 to DM 4119 6 41 to 48
1 2 3 4 5 6
Address Contents Meaning
DM 3000 0101 Upper 2 digits: Bank number (1 to 8)
Lower 2 digits: Cam output number (1 to 8)
DM 3001 0030 Step 1 ON data
DM 3002 0050 Step 1 OFF data
DM 3003 0080 Step 2 ON data
DM 3004 0115 Step 2 OFF data
DM 3005 0150 Step 3 ON data
DM 3006 0200 Step 3 OFF data
DM 3007 0260 Step 4 ON data
DM 3008 0320 Step 4 OFF data
DM 3009 0000 Step 5 ON data
DM 3010 0000 Step 5 OFF data
DM 3011 0000 Step 6 ON data
DM 3012 0000 Step 6 OFF data
DM 3013 0000 Step 7 ON data
DM 3014 0000 Step 7 OFF data