Olympus ESG-400 Скачать руководство пользователя страница 89

Страница: 89 / 160

Chapter 6 Push Button Functions

W7.091.601

ELECTROSURGICAL GENERATOR ESG-400

6.3 Select procedure

The “SELECT PROCEDURE” function recalls one of the settings saved in
memory.

Initiating the SELECT PROCEDURE function

Press the “SELECT PROCEDURE push button” (see figure 6.1).

The display changes to the “Select Procedure screen”.

The list of procedures saved in memory is displayed.

If a procedure has already been selected, this is indicated by a gray

button.

If no procedure has been saved, a “No procedure saved” message is

displayed.

To cancel the operation, press the “Return button” (see figure 6.1). The
screen returns to the “All screen” or “Set screen”.

Selecting a procedure

Press a button for a procedure to be recalled as shown in figure 6.2 (e.g.

“Lap. Coletomy”).

The selected procedure is recalled.

The “All screen” shows the output settings saved for that procedure.

The name of the recalled procedure is shown in the headline of the “All

screen”.

Figure 6.1

Select Procedure screen

SELECT

PROCEDURE

Содержание ESG-400

































































































































































Результаты поиска

Содержание ESG-400

Отзывы:

Olympus ESG-400, Инструкция по эксплуатации, Страница: 89 / 160

Результаты поиска

Содержание ESG-400

Отзывы: