Olympus ESG-400, Инструкция по эксплуатации, Страница: 27 / 160

Chapter 2 Nomenclature and Functions 25
W7.091.601 ELECTROSURGICAL GENERATOR ESG-400
2.5 All screen
1. Reference to output sockets indicator
This indicator shows the corresponding output socket where the same
symbol is printed on the front panel.
2. Output socket name
The name of the corresponding output socket is displayed here.
3. Autostart indicator
This symbol indicates if the autostart function is assigned to the
corresponding output socket. Blank if autostart or footswitch is not
assigned. Refer to chapter 6.4, “Assign footswitch and autostart function”.
4.
Procedure name
The name of the selected procedure is displayed here. Blank if no
procedure is selected.
5. Communication indicator
This symbol indicates if communication with peripheral equipment
connected to the docking socket is established.
6. Footswitch indicator (double pedal)
This symbol indicates if a connected double pedal footswitch is assigned
to the corresponding output socket. Blank if autostart or footswitch is not
assigned. Refer to chapter 6.4, “Assign footswitch and autostart function”.
7. Output mode
The name of the output mode as selected in the “Mode screen” is
displayed here. If “Off” is selected, “--“ will be displayed instead of power
level and effect.
8. Output power level
The number shows the output power level as selected in the “Set screen”.
If an output power level is set to zero, “--” will be displayed instead of
numbers.
9. Effect
The number shows the effect as selected in the “Set screen”. For RFCoag
mode the RCAP function can be selected instead of an effect (refer to
chapter 5.4, “Output setting”).
1.
2. 3. 4.
5.
8.
6.
11.
7.
9.
10.