Olympus CV-180, Инструкция по эксплуатации, Страница: 56 / 296

48
Chapter 4 Operation
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Fiberscope and camera head
1.
Ensure that this instrument and all connected devices are turned OFF.
2.
Connect the endoscope connector of the fiberscope to the light source,
referring to the instruction manual for the light source.
3.
Push the video plug of the camera head into the video connector socket of
the instrument all the way until it clicks, holding this instrument with a hand
so that it will not move. Confirm that the “UP” mark points upwards (see
Figure 4.3).
4.
Connect the video adapter and camera head to the eyepiece section of the
fiberscope, referring to the instruction manuals for the video adapter and
camera head.
Rigidscope and camera head
1.
Ensure that this instrument and all connected devices are turned OFF.
2.
Connect the light guide cable to the light source, referring to the instruction
manual for the light source.
3.
Push the video plug of the camera head into the video connector socket of
the instrument all the way until it clicks, holding this instrument with a hand
so that it will not move. Confirm that the “UP” mark points upwards (see
Figure 4.3).
4.
Attach the light guide cable, video adapter and camera head to the
rigidscope, referring to the instruction manuals for the light guide cable,
video adapter and camera head.