Olympus CV-180, Инструкция по эксплуатации, Страница: 267 / 296

Chapter 10 Troubleshooting
259
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Chapter 10 Troubleshooting
If the video system center is visibly damaged, does not function as expected, or
is found to have irregularities during the inspection described in Chapter 3,
“Inspection” and Chapter 8, “Installation and Connection”, or the use described
in Chapter 4, “Operation”, do not use the video system center and contact
Olympus. Some problems that appear to be malfunctions may be correctable by
referring to Section 10.1, “Troubleshooting guide”. If the problem cannot be
resolved by the described remedial action, stop using the video system center
and contact Olympus.
Never use the video system center if an abnormality is
suspected. Damage or irregularity in the instrument may
compromise patient or user safety and may result in more
severe equipment damage.
10.1 Troubleshooting guide
The following table shows the possible causes of and countermeasures against
troubles that may occur due to equipment setting errors or deterioration of
consumable.
Troubles or failures other than those listed in the following table need repair. As
repair performed by persons who are not qualified by Olympus could cause
patient or user injury and/or equipment damage, be sure to contact Olympus for
repair.
If an abnormality is suspected, turn the light source OFF
once and turn it ON again. If the abnormality cannot be
solved, turn the light source OFF and disconnect the power
cord to stop the flow of electricity completely.