Olympus CV-180, Инструкция по эксплуатации, Страница: 165 / 296

Chapter 8 Installation and Connection
157
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Chapter 8 Installation and Connection
• Review this chapter thoroughly, and prepare the instruments
properly before use. If the equipment is not properly prepared
before each use, equipment damage, patient and operator
injury and/or fire can occur.
• When non-medical electrical ancillary equipment is used,
connect its power cord via an isolation transformer prior to
connecting it to this video system center. Failure to do so can
cause electric shock, burns and/or fire.
• Turn OFF all system components before connecting them.
Otherwise, equipment damage or malfunction can result.
• Use appropriate cables only. Otherwise, equipment damage
or malfunction can result.
• Properly and securely connect all cables. Otherwise,
equipment damage or malfunction can result.
• The cables should not be sharply bent, pulled, twisted or
crushed. Cable damage can result.
• Never apply excessive force to connectors. This could
damage the connectors.
• Use this instrument only under the conditions described in
“Transportation, storage, and operation environment” and
“Specifications” in the Appendix. Otherwise, improper
performance, compromised safety and/or equipment damage
may result.
Prepare this video system center and compatible equipment (shown in the
“System chart” in the Appendix) before each use. Referring to the instruction
manuals of each system component, install and connect the equipment
according to the procedure described in this chapter.