Olympus CV-180, Инструкция по эксплуатации, Страница: 133 / 296

Chapter 5 Functions
125
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Image files and folders
The data files of the endoscopic images are stored in the image folder, which is
generated by the video system center, on the PC card.
 Files
The video system center numbers the endoscopic image files sequentially. The
names of each image file becomes like the following, and is numbered
sequentially in order of photographing.
• OLYMnnnn.jpg:
(“nnnn” is a four-digit number.)
 Folders
The folder in which image files are stored either newly generated or previously
generated ones are used according to the conditions such as turning ON or OFF
the system, with or without the patient ID, etc. (see Table 5.11). The folder
names are as follows.
• When the patient ID was entered: “8-digit date” + “max.15-digit patient
ID”
ex. 20050512 ABC123 (“2005, May, 12th” and “ABC123”)
• When no patient ID was entered: “8-digit date” + “15-digit X”
ex. 20050512 XXXXXXXXXXXXXXX
Resume function of patient data
display

1
ON OFF
Patient ID in the last observation Entered Not entered Entered Not entered
Patient ID was NOT entered after
the system was turned ON. The image files
are stored in the
previous folder.

2
New folder is generated.
Folder name - 8-digit date +15-digit X
Patient ID was entered after the
system was turned ON.
New folder is generated.
Folder name 8-digit date + Max.15-digit ID

1 For the resume function, see “Patient data display” on page 241.

2 The shaded region is used for recording the images into the same folder after swapping the endoscope during the
observation.
Table 5.11