Olympus CV-180, Инструкция по эксплуатации, Страница: 183 / 296

Chapter 8 Installation and Connection
175
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
OEV191H, OEV191
 When using RGB or YPbPr video signal
For connecting the monitors (OEV191H or OEV191) to the video system center,
use the cables listed below.
For easy cable connection, attach the cable color sheet to the cables (see Figure
8.16).
• To display an endoscopic image, set the factory default
“FACTORY” of the monitor to “FACTORY4”, according to the
instruction manual of the monitor. Otherwise, the monitor
remote function may not operate correctly.
• Setting the monitor to “FACTORY4” may make an ultrasound
image in the PinP display fuzzy. Set the monitor to
“FACTORY6” to sharpen it.
Model (length) Product name
Use any one of the following cables.
MAJ-921 (1.5 m)
MAJ-970 (4 m)
MAJ-1462 (7 m)
MAJ-1584 (15 m)
MAJ-1586 (2 m)
MAJ-846

1
(7 m)
MAJ-971

1
(15 m)
Monitor cable
Use either one of the following cables.
MAJ-1161 (4 m)
MAJ-1230 (7 m)
MAJ-1465 (15 m)
HDTV monitor remote cable

1 These cables are not compatible with the OEV191H.
Table 8.13