Olympus CV-180, Инструкция по эксплуатации, Страница: 264 / 296

256
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Adjustment Enhancement Mode
position
[Mode1], [ Mode2 ], [Mode3], [OFF] Initial mode of enhancement
Mode 1
Mode 2
Mode 3 [A1] - [A8], [B1] - [B8], [E1] - [E8] Setting of each
enhancement mode
The default settings are:
Mode 1:
A1
Mode 2: A3
Mode 3: A5
Color setting Color mode [Mode 1], [Mode 2], [Mode 3],
[
Mode 4 ]
Color tone of the monitor
Image size Image size Scope 1 [Medium], [ Full-height ] The display area size of the
endoscopic image
Scope 2 [ Small ], [Medium]
Scope 3 [ Medium ], [Full-height]
Scope 4 [Medium], [ Full-height ]
Brightness Brightness
setting Iris [ Auto ], [Peak] Initial method of metering
Iris auto [ AUTO 1 ], [AUTO 2], [AVE] Metering method for “Auto”
Iris speed [High], [ Medium ], [Low] Speed of the automatic
brightness control
Iris L [1], [ 2 ], [3] Fine-tuning of “Iris Speed”
Iris D [1], [ 2 ], [3] Fine-tuning of “Iris Speed”
AGC [ ON ], [OFF] AGC function ON or OFF
Contrast [ Normal ], [Low], [High] Initial setting of contrast
Exposure
area [ Mask ], [Center], [Full] Setting of the metering area
Electronic
shutter [ ON ], [OFF] Electric shutter function ON
or OFF
Display Display Save data [ YES ], [NO]
Scope
nickname [Enable], [ OFF ] The display function of the
scope nickname is ON or
OFF.
Release
index time [OFF], [2 sec], [ 4 sec ], [Always] Setting of display time of the
index image
Special light [ Enable ], [Disable] The display function of the
special light observation is
ON or OFF.
Orientation [ Normal ], [Rotation] Setting of the orientation of
the image
Setup item Setting value Note
Table 9.53