Olympus CV-180, Инструкция по эксплуатации, Страница: 256 / 296

248
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
 Position of the PinP sub image
Click the check box for the position to display the PinP sub image. The selected
check box turns black.
Figure 9.43
 Display mode of PinP
1.
Click “ ” of “Movement” (see Figure 9.41).The PinP modes appear in the
pull-down menu.
2.
Click the desired PinP mode. The selected PinP mode is displayed.
3.
Click “ ” of “Mode” if “ON/OFF” of “Movement” is selected (see Figure
9.41). The display modes appear in the pull-down menu.
Setting value
Explanation (see “PinP (picture in picture) display” on
page 64.)
On/Off The PinP button toggles back and forth between the non-PinP
mode and the PinP mode.
Mode change The PinP button switches between the PinP mode, endoscopic
image and external image.
Table 9.49
Setting value Explanation
SCOPE/aux. The endoscopic image is the main image and the external image
is the sub image.
AUX./scope The external image is the main image and the endoscopic image
is the sub image.
Table 9.50
The highlighted check box shows
the position of the sub image
A B
C D
D
A B
C