154
E
When the camera is connected to a computer, an error
message appears while data is being transferred to the
computer.
1
The cable is not plugged in correctly.
[
Connect the cable correctly. (P. 140)
2
The power is OFF.
[
Press the power button to turn it ON. (P. 96)
3
The batteries are exhausted.
[
Replace the batteries with new ones (P. 40) or use the
optional AC adaptor (P. 44).
4
The serial port is not selected correctly.
[
Use the operating system software to see if the serial
port is selected correctly. (P. 140)
5
There is no available serial port.
[
Make one available by following the PC’s instructions.
[
(Macintosh only) Turn off AppleTalk/LocalTalk.
6
The image transfer speed is not selected correctly.
[
Select the right speed on the computer.
7
TWAIN/Plug-In is not installed.
[
Install TWAIN/Plug-In on your computer.
* When no operations can be performed by pressing any
buttons, push the Reset button in the Card
compartment cover, then press the Power button. (P.
48)
Содержание CAMEDIA C-1400L
Страница 170: ...MEMO...
Страница 171: ...MEMO...