Oce Arizona 318 GL, Руководство пользователя

Страница: 87 / 224

Loading the Media - Standard Method
The standard way to load media is quick and efficient and ensures minimum waste of material.
However, for some longer print jobs or when you use media that is more flexible and therefore
harder to achieve good alignment, there is an alternate method that will be described in Section
D. Straight loading of roll media is very important to avoid wrinkles and banding in the print,
especially on longer print job runs. If you want to ensure that a media is loaded straight or if you
see an inverted light/dark banding across the media, we recommend the alternative method.
Procedure
1.
Select the Load icon from the Roll Media Manager.
2.
If you are going to print with "Print Side In", click the icon in the Roll Media manager ("Print Side
Out" is the default so you do not need to select it unless you have previously used Print Side In).
Note that the icon toggles from one choice to the other when you click it.
NOTE
For Print Side Out, the media unrolls from the bottom the supply shaft.
For Print Side In, the media unrolls from the top of the supply shaft.
3.
Wait for the gantry to move part way across the table.
4.
Thread the media under the media tension bar (Note that the media is threaded for Print Side Out
in the photo below). Pay out media with the foot pedal as required.
[45] Thread Media Under Tension Bar (Print side out)
Loading the Media - Standard Method
Chapter 6 - How to Operate the Roll Media Option 87