manualshive.com logo in svg

Oce Arizona 318 GL, Руководство пользователя

На нашем сайте вы можете бесплатно скачать руководство пользователя (User Manual) для продукта Oce Arizona 318 GL. Загрузите его с manualshive.com. Узнайте, как настроить и использовать этот продукт для достижения отличных результатов.

Поделиться
Скачать
background image

UV Curing Lamp
Control Button

This button controls the UV curing lamps. The state of the button reflects
the state of the lamps. The UV lamps will timeout after 15 minutes of inac-
tivity (time can be changed by a service technician). If lamps are extin-
guished when the timeout expired, then the button changes its status to
unchecked. If lamps are off before the print starts, then lamps are turned
on automatically and the button would reflect the state accordingly.

Table vacuum
button

This button controls the table vacuum and duplicates the function of the ta-
ble vacuum foot switch. The button reflects the actual state of the table
vacuum. There is an automatic timeout that will turn the table vacuum off.
The actual time is set in the Settings module under Printer.

NOTE

Once turned off, vacuum cannot be turned on again for approxi-
mately 5 seconds.

Start Button

This icon can be used to start a flatbed print job (same function as the
physical button on the table).

Nozzle check

This button populates the active job list with a job that prints a nozzle check
pattern. The nozzle check print is used to identify nozzle dropouts that can
cause banding and other print quality problems.

NOTE

For information on how to use the nozzle check to troubleshoot
nozzle dropouts, see the Printhead Maintenance section in the
Maintenance chapter.

6) Active Print Job List

The active job list consists of a table, job count summary on top and job order control buttons on
the left. A job count summary displays total number of active jobs and number of jobs put on
hold. Job order control buttons can be used to change order of jobs queued for printing. The
active job list has the following features:
• All incoming jobs issued from the ONYX ProductionHouse workflow go directly into the active

job list.

• After a job is printed it automatically moves from the active to the inactive job list.
• The operator can drag and drop jobs to move them between the active and inactive job lists

(except for a job that is being prepared to print).

• All the jobs are stored locally on the printer hard drive.
• Selecting a job highlights the job and updates the job information area.
• Jobs can be moved up/down in the active list using the button on the left. Jobs can either be

printed, held, canceled or deleted. Jobs canceled from the active list are moved to the inactive
list.

• Deleted jobs are removed from the hard drive and are no longer accessible (except for Special

Prints, which cannot be deleted).

• The current job being printed can be paused or canceled. A canceled job will move from the

active to the inactive print job list.

• A job count summary displays the total number of active and inactive jobs and the number of

active jobs on hold.

7) Job Placement Preview

The table placement preview shows the print location and a proportional representation of the
image in relation to the table. The zoom button in the bottom right corner activates a popup
preview window. If a preview image is not available, an approximately sized white box is used as
a placeholder, and the zoom button is not displayed.

Print Job Control Module

46

Chapter 4 - How to Navigate the User Interface

Содержание Arizona 318 GL

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Arizona 318 GL

GCC Technologies 12 Ram Installation Manual preview
12
Бренд: GCC Technologies Страницы: 14
Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Бренд: Samsung Страницы: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Бренд: Samsung Страницы: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Бренд: Samsung Страницы: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Бренд: Samsung Страницы: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Бренд: Samsung Страницы: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Бренд: Samsung Страницы: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Бренд: Samsung Страницы: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Бренд: Samsung Страницы: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Бренд: Samsung Страницы: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Бренд: Samsung Страницы: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Бренд: Samsung Страницы: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Бренд: Samsung Страницы: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Бренд: Samsung Страницы: 2
Samsung M337 User Manual preview
M337
Бренд: Samsung Страницы: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Бренд: Samsung Страницы: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Бренд: Samsung Страницы: 414
Samsung SCX 6555N - MultiXpress Mono Multifunction Administrator'S Manual preview
SCX 6555N - MultiXpress Mono Multifunction
Бренд: Samsung Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды