Oce Arizona 318 GL, Руководство пользователя

Страница: 16 / 224

Materials Handling Safety
Introduction
Many kinds of supplies and materials are required for the daily maintenance and ongoing
operations of an inkjet printer. The following are some cautions and suggestions for the safe
handling of these items.
Consumables, supplies and maintenance materials
WARNING
• Do not throw ink, ink containing parts or contaminated parts, into an open flame.
• Do not leave ink, ink containing parts or contaminated parts, within reach of children.
• Keep consumables, supplies maintenance materials away from children. Store these
materials away from containers for food and drink.
• Be careful when handling fluids. Clean up spilled fluids immediately, to minimize the risk of
slipping and serious injuries.
CAUTION
• Only use the materials the manufacturer recommends and that are developed for the
machine. Materials that have not been approved by the manufacturer may result in failure of
the machine.
• Use maintenance materials, supplies and consumables for their intended purpose only.
• Ink polluted gloves and uncured printed media are considered chemical waste and should be
disposed according to local regulations.
• Waste of consumables, supplies and maintenance materials must not be disposed together
with household rubbish. Do not allow the product to reach the sewage system. Dispose of
waste of consumables, supplies and maintenance materials and its packaging containing
residues according to all federal, state and local applicable regulations. Please see the
relevant safety data sheet for the specific requirements.
• Curing of media of the Océ supported media-list is tested and considered sufficient under
standard conditions. For curing of custom media see the section .
IMPORTANT
• Do not place any liquids on the machine.
• Do not put excess pressure or weight on the printer vacuum table, especially at the two ends
of the printer.
Materials Handling Safety
16 Chapter 3 - Safety Information