OcÃ© VarioLink 2221 Скачать руководство пользователя страница 303

Страница: 303 / 425

Application functions

VarioLink 2221/2821/3621

8-31

App

lica

tio

n f

unct

ions

Chapter 8

To recall an overlay image

Stored overlay images can be recalled and printed overlapping copies.

The “Image Overlay” function is available only if optional hard disk is in-
stalled.

Position the document to be copied.

–

For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.

Touch [Application], and
then touch [Image Set-
tings].

The Image Settings
screen appears.

Touch [Image Overlay].

–

To cancel the Image
Settings functions,
touch [OFF].

The Image Overlay
screen appears.

Touch [Recall], and then
touch the button for the
number stored with the
image.

–

To cancel the “Image
Overlay” function,
touch [OFF].

Содержание VarioLink 2221










































































































































































































































































































































































































































Результаты поиска

Содержание VarioLink 2221

Отзывы:

OcÃ© VarioLink 2221, Руководство пользователя, Страница: 303 / 425

Результаты поиска

Содержание VarioLink 2221

Отзывы: