Océ CS230, Руководство пользователя

Страница: 50 / 468

3 Scanning documents
3-8 CS230 (Phase3)
3.3 Sending data in an e-mail message (Scan to e-mail)
Scan to e-mail
The Scan to E-mail operation is used to send images scanned on this
machine to an e-mail address as an attachment.
The methods described below are available for specifying the destination.
The methods can also be combined, for example, by selecting a group
destination, then adding other destinations through direct input.
2
Note
For the procedure for sending e-mail, refer to "Sending the scanned data
in an e-mail message" on page 2-4.
Using programs
"Program" refers to a set of destination addresses and scan settings that are
registered together. This feature is convenient for frequently scanning
documents and sending data under the same conditions. The following
procedure describes how to send data by selecting a program that has been
registered in advance.
For details on registering programs, refer to "Registering program
destinations" on page 4-27.
1
Press the [Scan] key on the control
panel.
The Scan mode screen appears.