Observint NVR4, Руководство пользователя для прошивки

Страница: 73 / 117

67 NVR4, NVR8, NVR16, NVR32 Firmware User Manual
To load defaults, check the items you want restore to default, or check Select All to choose all items, and then click
Apply
to load
default settings of your chosen items. Allow the operation to complete before continuing.
8.3.3 Upgrade
Use the Upgrade feature to replace the firmware in the recorder with a newer version.
1. Copy the firmware file (.sw filename extension) to a USB drive
2. Insert the USB flash drive into the USB port of the recorder.
3. In the Upgrade menu, click
Select File button, and then select the firmware file in your USB flash drive. Click OK .
4. Click Upgrade to start the system upgrade. The system upgrade will last around 5-10 minutes. Allow the upgrade process to
complete before continuing. Follow the on-screen instructions to complete the process.
DO NOT
power off the NVR or remove
the USB from NVR during firmware upgrade.
5. After the upgrade process completes, remove the flash drive from the recorder.
8.3.4 Parameter Management
You can backup ( Save ) the main menu (system configuration) settings to a USB flash drive, and then restore ( Load ) them later to
return the system to its former state. You can also Load the menu settings onto another recorder (must be same hardware).
To Save the Main Menu settings:
1. Plug a USB flash drive with sufficient space into a USB port on the recorder.
SECTION 8: SYSTEM SETTINGS