NTT docomo SO Series, Инструкция по эксплуатации

Страница: 195 / 269

193
Settings
･
The PUK code is written on the
subscription form (copy for customer)
handed at the subscription in the
docomo Shop. If you subscribed other
than docomo Shop, you must bring your
official identification (such as driver's
license), the docomo nano UIM card with
you to the nearest docomo Shop or
contact the "General Inquiries" on the last
page.
■
Network security code
The network security code is a 4-digit
number necessary for identification or using
the docomo network services at reception
of your request in docomo Shop, or at
docomo Information Center or "
お客様サ
ポート
(Customer support)". It can be set
any number at the subscription and also
changed later by yourself.
･
For details on network security code, refer
to NTT DOCOMO website.
https://www.nttdocomo.co.jp/english/
support/trouble/password/network/
■
PIN code
The docomo nano UIM card has a security
code of PIN code. The code is set to "0000"
at subscription, which you can change by
yourself (P.194).
PIN code is a 4- to 8-digit security number
(code) that must be entered for user
confirmation to prevent unauthorized use
of docomo nano UIM card by a third party
every time you insert the docomo nano UIM
card into the terminal or when the terminal
is powered on. Entering the PIN code
enables making/receiving calls and
terminal operation.
･
If you use a newly purchased terminal
with docomo nano UIM card you have
been using, use the PIN code set on the
former terminal. If you did not change the
setting, the code is "0000".
･
If you enter a wrong PIN code 3 times
consecutively, the PIN code is locked and
cannot be used anymore. In this case,
unlock with "PIN Unlock Key (PUK code)"
(P.194).