nStor NexStor 4700S Series, Руководство пользователя

Страница: 80 / 110

Chapter 6 - Maintenance
Replacing an AC Power Supply
68
3 Using your thumb, slide the power supply release latch while pulling the
power supply from the enclosure.
4 Remove the replacement power supply from the shipping container and
inspect for obvious damage. Save the packaging material.
5 Install the new power supply by sliding it into its open bay and ensuring it
seats completely and the release latch resets.
6 Re-connect the power cord.
Insert the power cord into the AC power cord module and secure it with the
power cord bale.
7
Turn the On/Off switch to the “On” position on the replacement power
supply.
NOTE:
The front bezel Power Supply Status LED will return to a normal
state (steady green).
8
Using the packaging material from the replacement power supply, repackage
and return the failed power supply per your RMA instructions.
4700S.book Page 68 Wednesday, April 6, 2005 2:14 PM