nStor NexStor 4700S Series, Руководство пользователя

Страница: 66 / 110

Chapter 4 - Managing and Monitoring
Updating Controller Firmware
54
14 Click the browse button and locate the new Firmware file and click “Send.”
The firmware file will be named similar to “W_R223.bin” or
“98064001_223.bin.”
NOTE: Ensure that the protocol “1K Xmodem” is selected. The “1K
Xmodem” protocol is preferred due to its superior error detection
(CRC vs. checksum).
From the send screen you can monitor the progress of the download. You
can safely stop the transfer without affecting your existing firmware any time
during the transfer until it has been completed. The upload does not
overwrite the firmware during the upload process, it writes the new code into
RAM until completed, then copies the new firmware code to the EEPROM
after verification.
If you elect to stop a download in progress, ensure that the stop (abort)
command was completed by clicking the Cancel button.
Xmodem Send File Screen
15
After the transfer screen disappears, the controller will automatically restart.
4700S.book Page 54 Wednesday, April 6, 2005 2:14 PM