nStor NexStor 4700S Series, Руководство пользователя

Страница: 48 / 110

Chapter 3 - Setup and Installation
Direct Attach Connection - Single Host (Dual HBAs)
36
a Connect a cable from the Host HBA SCSI port to the lower “CH 0”
connector on the RAID Controller.
Direct Attach Connection - Single Host Single HBA Cabling Diagram
3
If you wish to add additional enclosure(s), follow the instructions found at
“Expansion Connection” on page 39, otherwise skip to the next step.
4 Power on your system, refer to “Powering On the Storage System” on
page 41.
This completes the setup and cabling of this configuration.
Direct Attach Connection - Single Host (Dual HBAs)
1 Complete the storage system installation.
2
Connect the SCSI data cable(s).
a Connect one cable from the Host HBA SCSI port to the lower “Host CH
0” connector on the RAID Controller.
b
Connect a second cable from a second Host HBA SCSI port or the
second SCSI port of a dual ported HBA to the lower “Host CH 1”
connector on the RAID Controller.
Nex S tor 4712 S Enclo su re
Ho s t S erver
R S -2 3 2
DTE
H O S T CH 1 H O S T CH 0
H O S T CH 1 H O S T CH 0
DR
T H1A
BK1A
PWR H0A BK0A
HBA
4700S.book Page 36 Wednesday, April 6, 2005 2:14 PM