
CONTENTS DESCRIPTION
PAGE
|
26
Table 1-1 v30 ship kit contents
Shipping Box Contents
Qty
OEM v30 Laser
1
CO
2
Lasers Manual CD
1
Quick Start Plug (except SA models)
1
Cooling Tubing (water-cooled only
1
Mounting Bolts
3
Spare Fuse
1
Final Test Report (not shown
1
Contents description
Each item listed in Table 1-1 is described below.
OEM v30 Laser – for cutting, welding, drilling, and marking a wide variety of products and materials.
v30 Operator’s Manual CD –
contains a v30 manual that provides setup, operation, and maintenance
information for your OEM v30 laser.
Quick Start Plug (except SA models) –
connects to the v30’s Interface A (DB-9) connector. A built-in
jumper enables the v30 for initial start-up and testing.
Cooling Tubing (water-cooled only) – carries cooling water from the chiller to the laser and back. This
black polyethylene tubing is 1/2" O.D. by 30 feet and must be cut to length.
Mounting Bolts –
Three each 1/4–20 × 5/8" UNC cap screws are provided for fastening the v30 laser to
your mounting surface.
Spare Fuse (not shown) –
fast-blow 20 A fuse incorporated into the positive DC power cable protects
the laser’s internal circuitry. See Troubleshooting in the Maintenance/Troubleshooting chapter for
replacement information.
Final Test Report (not shown) – contains data collected during the laser’s final pre-shipment test.
Содержание v30
